FCC ID: TE7M5250 3G Mobile Wi-Fi

by: TP-Link Technologies Co., Ltd. latest update: 2013-12-26 model: M5250

Two grants have been issued under this FCC ID on 12/26/2013 (this is one of thirty-six releases in 2013 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked warrantee terms, troubleshooting guides, drivers, password defaults, & instructions.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies					exhibits	applications
		manual	photos		label

all exhibits 15
1 ~ 2013-12-26 16
2 ~ 2013-12-26 14

app s				submitted / available
1 2	User Guide	Users Manual	pdf	2.58 MiB
1 2	Internal Photos	Internal Photos	pdf	227.43 KiB
1 2	External Photos	External Photos	pdf	154.08 KiB
1 2	Label Location	ID Label/Location Info	pdf	37.07 KiB
1 2	Agent Authorization	Cover Letter(s)	pdf	91.49 KiB
1 2	Antenna Description	Operational Description	pdf		December 25 2013	confidential
1 2	Block Diagram	Block Diagram	pdf		December 25 2013	confidential
1 2	Operational Description	Operational Description	pdf		December 25 2013	confidential
1 2	Parts List and Tune-Up Info	Parts List/Tune Up Info	pdf		December 25 2013	confidential
1 2	Request for Confidentiality	Cover Letter(s)	pdf	154.01 KiB
1 2		RF Exposure Info	pdf
1 2		RF Exposure Info	pdf
1 2	Schematics	Schematics	pdf		December 25 2013	confidential
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf

exhibit
download
text

1 2

User Guide

Users Manual

pdf

2.58 MiB

M5250 3G Mobile Wi-Fi REV 1.0.0 1910010950 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO.,LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO.,LTD. Copyright 2013 TP-LINK TECHNOLOGIES CO.,LTD. All rights reserved. http://www.tp-link.com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:

M5250 radiates radio frequency energy at a level below the United States FCC radio frequency exposure limits. Nevertheless, this device should be used in such a manner that the potential for human contact during normal operation is minimized. For body worn operation, this device has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 5 mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. This Mobile device has been evaluated for and shown compliant with the FCC RF Exposure limits. The unit of measurement for RF exposure is Specific Absorption Rate (SAR). The FCC SAR limits for mobile phone is 1.6W/Kg per 1g of tissue. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device has been designed to operate with the antennas listed below, and having a maximum gain of 5 dBi. Antennas not included in this list or having a gain greater than 5 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.The limits are part of extensive recom-

mendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Council's recommended limit for mobile devices is the "Specific Absorption Rate" (SAR), and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP). For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and the European Standard EN 62311 and EN 62209-2. SAR is measured with the device directly contacted to the body while transmitting at the highest certified output power level in all frequency bands of the mobile device. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1)This device may not cause interference, and

(2)This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norms CNR exemptes de licence dIndustrie Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1)cet appareil ne doit pas provoquer dinterfrences et

(2)cet appareil doit accepter toute interfrence, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil. Industry Canada Statement Complies with the Canadian ICES-003 Class B specifications. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. Korea Warning Statements:

. NCC Notice & BSMI Notice

. Safety Information When product has power button, the power button is one of the way to shut off the product;

When there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. This product can be used in the following countries:

AT ES LT RU BG FI LV SE BY FR MT SK CA GB NL TR CZ GR NO UA DE HU PL DK IE PT EE IT RO Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment:

Product Description: 3G Mobile Wi-Fi Model No.: M5250 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:

Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents ETSI EN 300 328 V1.7.1: 2006 ETSI EN 301 489-1 V1.9.2:2011& ETSI EN 301 489-17 V2.1.1:2009 ETSI EN 301 489-7 V1.3.1:2005& ETSI EN 301 489-24 V1.5.1:2010 ETSI EN 301 908-1 V6.2.1:2013& ETSI EN 301 908-2 V6.2.1:2013 ETSI EN 301 908-1 V5.2.1:(2011-05)& ETSI EN 301 908-2 V5.2.1:(2011-07) ETSI EN 301 511 V9.0.2:2003 EN 50566:2013 (EN 62209-2:2010) EN 55022:2010 EN 55024:2010 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 EN 62311:2008 The product carries the CE Mark:

Person responsible for marking this declaration:

Yang Hongliang Product Manager of International Business Date of issue: 201 TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China CONTENTS Package Contents ........................................................................................................... 1 Chapter 1. Introduction............................................................................................. 2 1.1 Product Overview............................................................................................................ 2 1.2 Main Features ................................................................................................................. 2 1.3 Physical Description ....................................................................................................... 2 Chapter 2. Hardware Installation ............................................................................. 4 2.1 Environment Requirements ............................................................................................ 4 2.2 Hardware Installation ...................................................................................................... 4 Chapter 3. Quick Installation Guide ........................................................................ 7 3.1 System Requirements..................................................................................................... 7 3.2 TCP/IP Configuration ...................................................................................................... 7 3.3 Wireless Connection ....................................................................................................... 7 3.4 Wizard ............................................................................................................................. 9 Chapter 4. Device Configuration ........................................................................... 12 4.1 Status ............................................................................................................................ 12 4.2 Wizard ........................................................................................................................... 13 4.3 SMS .............................................................................................................................. 13 4.3.1 New Message ................................................................................................... 14 4.3.2 Inbox.................................................................................................................. 14 4.3.3 Outbox ............................................................................................................... 15 4.3.4 Drafts ................................................................................................................. 15 4.3.5 SMS Settings .................................................................................................... 17 4.4 Advanced ...................................................................................................................... 18 4.4.1 Dial-up ............................................................................................................... 18 4.4.2 SIM Lock ........................................................................................................... 22 4.4.3 Wireless ............................................................................................................ 24 4.4.4 DHCP Server .................................................................................................... 27 4.4.5 System Tools ..................................................................................................... 29 4.4.6 Logout ............................................................................................................... 34 Appendix A: FAQ ........................................................................................................... 35 Appendix B: Configuring the PC................................................................................. 37 Appendix C: Specifications ......................................................................................... 40 Appendix D: Glossary .................................................................................................. 41 I M5250 3G Mobile Wi-Fi User Guide Package Contents The following items should be found in your package:

3G Mobile Wi-Fi M5250 One USB cable One battery Quick Installation Guide One Micro SIM Adapter One Nano SIM Adapter Note:

Make sure that the package contains the above items. If any of the listed items is damaged or missing, please contact with your distributor. Conventions The Device or M5250 mentioned in this guide stands for 3G Mobile Wi-Fi M5250 without any explanation.

-1-

M5250 3G Mobile Wi-Fi User Guide Chapter 1. Introduction 1.1 Product Overview TP-LINKs M5250 is at the forefront of wireless 3G sharing. Equipped with a built-in 3G modem, you can instantly establish your own Wi-Fi hotspot simply by inserting a 3G SIM card at the interior of the device. With up to 21.6Mbps download and 5.76Mbps upload speeds, M5250 is able to provide 3G wireless sharing to up to 10 users simultaneously. Its pocket-sized design and powerful 2000mAh internal battery make it an ideal travel companion, allowing users to work or play for hours on end. 1.2 Main Features Equipped with a built-in 3G modem - No other bulky devices required HSPA+ supported with up to 21.6Mbps download and 5.76Mbps upload speeds Supports up to 10 users simultaneously 2000mAh internal battery for extended hours of outdoor use Portable and cobblestone design ideal for travel use Micro USB port for versatile recharging LED display provides an intuitive view of the devices working status Equipped with a micro SD card slot for up to 32GB of optional storage 1.3 Physical Description Power Button LED Micro USB Port Scree n Figure 1-1 the Exterior SIM Card Slot Micro SD Memory Card Slot RESET Button (hole) Figure 1-2 the Interior

-2-

M5250 3G Mobile Wi-Fi User Guide The details about the Exterior and Interior are explained as below. Power Button: When the Device is successfully installed, and its powered (either by battery or electricity); press and hold this button for about 5 seconds to turn on the Device, and if you want to turn it off, please press this button for another 3 seconds. Micro USB Port: Its for you to connect the Device with the power adapter (attached in the package) via the USB cable. SIM Card Slot: Its where to insert your SIM card. Micro SD Memory Card Slot: Its where to insert your micro SD memory card. RESET Button (hole): Its the button to restore the Device to its factory defaults. With the Device powered on, use a pin to press and hold the RESET button (hole) for about 5 seconds, until all of the LED light on; then release the button and wait the Device to reboot and restore its factory default settings. LED :

Figure 1-3 LED The LED Indication:

Item Description Indication Network status Indicates the successful network connection. Wi-Fi connection Displays the Wi-Fi status. Battery Displays the battery power status. Table 1-1 The LED Screen details Note:

Pressing the power button will light up or turn off the LED . When you leave alone the buttons on the device, the and will light on for about 60 seconds and then turn off.

-3-

M5250 3G Mobile Wi-Fi User Guide Chapter 2. Hardware Installation 2.1 Environment Requirements Place the Device in a well-ventilated place far from any heater or heating vent Avoid direct irradiation of any strong light (such as sunlight) Keep at least 2 inches (5 cm) of clear space around the Device Operating Temperature: 0~35 (32~95) Operating Humidity: 0%~75%RH, Non-condensing 2.2 Hardware Installation STEP 1: Install SIM card and memory card. 1) Open the cover upwards (as the arrow shows). 2) Make sure to have the SIM cards metal chip downwards and the triangle notch outwards, and then slide the card into its slot (in the direction as the arrow shows). Note:

Micro or Nano SIM cards should be converted using included adapter. 3) First, push and then lift the locker to open it. Second, have the memory cards metal chip downwards and inwards, and then fit it in its slot. Finally, put down and then pull the locker to lock it.

-4-

M5250 3G Mobile Wi-Fi User Guide Note:

The micro SD memory card is optional. You can purchase it appropriate to your own need. STEP 2: Install the battery. 1) Touch the metal contacts of the battery to the metal points of the Device, and then press to fit the battery body into the slot. 2) Before closing the cover, please note down the SSID and the wireless password on the label for later use. SSID: The wireless network name of M5250 Wireless Password: The pre-encryption of M5250 3) Close the cover by pressing it.

-5-

Note:

Its advised that you do not use M5250 until the battery has been installed. M5250 3G Mobile Wi-Fi User Guide When finishing the above two-step installation, you can press and hold the power button for about 5 seconds to turn on M5250. Tips:

You are supported to charge the battery in three ways:

Method 1:

1) Connect one end of the USB cable to the micro USB port. 2) Connect the other end of the USB cable to the USB port of the power adapter. 3) Plug the power adapter to a standard wall socket. Method 2:

1) Connect one end of the USB cable to the micro USB port. 2) Connect the other end of the USB cable to the USB port of your PC. Method 3:

1) Connect one end of the USB cable to the micro USB port. 2) Connect the other end of the USB cable to the USB port of your power bank.

-6-

Chapter 3. Quick Installation Guide M5250 3G Mobile Wi-Fi User Guide This chapter will guide you to quickly set up the basic functions for your M5250 3G Mobile Wi-Fi. 3.1 System Requirements SIM card with Internet access enabled. Computer with wireless network card. Web browser, such as Mozilla Firefox, Internet Explorer, Google Chrome, Apple Safari, etc. 3.2 TCP/IP Configuration The default IP address of the M5250 3G Mobile Wi-Fi is 192.168.0.1, and the default Subnet Mask is 255.255.255.0, which values can be changed as you desire. In this guide, we use all the default values for description, and take the configuration in Windows XP for example. While, Pads or Wi-Fi cellphones by default obtain IP address and DNS server address automatically, so you can just skip this step and continue with the 3.3 Wireless Connection. Note:

Before configuration, please make sure your computer has been equipped with a wireless network adapter. Obtain an IP address automatically 1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. Please refer to Appendix B: Configuring the PC for the detailed instructions. 2) Then the built-in DHCP server will assign an IP address for the PC. Configure the IP address manually Set up the TCP/IP Protocol manually for your PC. Please refer to Appendix B: Configuring the PC for the detailed instructions. 3.3 Wireless Connection Note:

To log in the Devices web-based management page, you need to first connect to the wireless network of the Device. 1. Click the icon at the bottom of your desktop. 2. Click the refresh button

, and then select the SSID of M5250 and then click Connect.

-7-

M5250 3G Mobile Wi-Fi User Guide Note:

The default SSID TP-LINK_M5250_XXXXXX (XXXXXX is the last 6 characters of the devices MAC address).

(also called Wireless Network Name) of the device is 3. Enter the wireless password youve noted down in the Security Key field, and then click OK. Note:

You can refer to the label on the rear cover for the default SSID and wireless password of M5250. 4. When Connected appears behind the SSID of M5250, youve successfully connected to its wireless network. Note:

You can enjoy the 3G mobile connection instantaneously, after the device has successfully connected to M5250 (with a SIM card inserted) and M5250s LED displays the network status icon

. Otherwise, please continue with 3.4 Wizard to further configure your device.

-8-

M5250 3G Mobile Wi-Fi User Guide 3.4 Wizard 1. Open a web-browser, enter the default address 192.168.0.1 in the address field and then press Enter. When the login window appears, enter the default username and password:

admin (in lower case letters) , and then click the Log in button or press the Enter. Figure 3-1 Login Window Note:

If the above screen does not pop-up, it means that your Web-browser has been set to a proxy. Go to menu Tools > Internet Options > Connections > LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. 2. After successful login, there will appear the Status page. Click Wizard to configure the basic network settings for accessing network. Click Next to continue. Figure 3-2 Wizard Start

-9-

M5250 3G Mobile Wi-Fi User Guide 3. On the Dial-up Settings page shows the ISP information of the SIM card inserted. Click Next to continue, if you are sure the information is correct. You can also click Create to create a new profile. Figure 3-3 Wizard Dial-up Settings 4. On the Wireless Settings page, you can create a unique and easy-to-remember wireless network name (SSID) as well as Wireless Password, or you can keep it default. Then click Next to continue. Figure 3-4 Wizard Wireless Settings 5. On the Finish page, please double-check your settings. If all the parameters are verified, click Finish to complete the Wizard; if there is anything wrong, you can click Back to

-10-

re-configure it. M5250 3G Mobile Wi-Fi User Guide Figure 3-5 Wizard Finish

-11-

M5250 3G Mobile Wi-Fi User Guide Chapter 4. Device Configuration After the successful login to the web-based management page of M5250, you will see the main menu listing Status, Wizard, SMS and Advanced on the top. In the following parts, these items will be explained in details, about their respective functions and configurations. Figure 4-1 Main Menu 4.1 Status The Status page displays the current status information about the device. All information is read-only. Figure 4-2 Status Connection Status: Displays the devices current connection status, including the connection and SIM card status, Dial-up and network type, IP address, primary and secondary DNS server. Note:

When the device is in the roaming state, the Network Type will be shown as: XXXX(Roaming). XXXX means the network type. Statistic: Displays the devices statistics, including current received and sent data, online time and total data used. WiFi Status: Displays the devices current wireless settings, including SSID, channel, encryption type and current Wireless clients.

-12-

M5250 3G Mobile Wi-Fi User Guide Click Data Correction to correct the accumulate data used. If the data statistics is different from that your ISP provided, please click Data Correction button, and input the data statistics your ISP provided to correct the accumulate data used. Click Wireless Settings to head for the Wireless Basic Settings page and configure it. Click Refresh to get the status information updated. 4.2 Wizard Please refer to 3.4 Wizard. 4.3 SMS Figure 4-3 SMS Menu There are five submenus under the SMS tab (as shown in Figure 4-3): New Message, Inbox, Outbox, Drafts and SMS Settings. Click any of them, and you will be able to configure the corresponding functions.

-13-

4.3.1 New Message M5250 3G Mobile Wi-Fi User Guide Figure 4-4 New Message Phone Number: Enter the receivers cellphone number. Content: Text your message in this box. Click Send to send the message. Click Save to save the message in the Drafts box. 4.3.2 Inbox Figure 4-5 Inbox Index: The index of the message. Status:

means the message has been read. means the message hasn't been

-14-

M5250 3G Mobile Wi-Fi User Guide read yet. Received: Shows the date and time when the message was received. Phone Number: Shows the cellphone number that sent this message. Content: Click to unfold and read the detailed content of the message. Select: Select the message(s) for deletion. Click Select All to select all of the messages. Click Refresh to refresh the inbox, and get any new message(s). Click Delete to delete the message(s) selected. 4.3.3 Outbox Figure 4-6 Outbox Index: The index of the message. Delivered: Shows the date and time when the message was sent. Phone Number: Shows the cellphone number that the message was planned to be sent to. Content: Click to unfold and read the detailed content of the message. Select: Select the message(s) for deletion. Click Select All to select all of the messages. Click Refresh to refresh the inbox. Click Delete to delete the message(s) selected. 4.3.4 Drafts You can review the unsent saved message(s) on this page.

-15-

M5250 3G Mobile Wi-Fi User Guide Index: The index of the message. Phone Number: Shows the cellphone number that this message was planned to be sent Figure 4-7 Drafts to. Content: Click to unfold and read the detailed content of the message(s), or for further edition and delivery (as shown in Figure 4-8). Select: Select the message(s) for deletion. Click Select All to select all of the messages. Click Refresh to refresh the drafts. Click Delete to delete the message(s) selected. Figure 4-8 Edit Message (Drafts)

-16-

4.3.5 SMS Settings On this page, you can do the following settings:

M5250 3G Mobile Wi-Fi User Guide Figure 4-9 Settings Message Center: Disabled by default. It's recommended to keep the default setting. If you want to manually set the Message Center Number, please select Enable. Message Center Number: When the Message Center is enabled, you can enter the Message Center Number of the local ISP. If you enter a wrong number, the SMS would be affected and not properly used. Save the Delivered Messages: Enable it to automatically save the delivered messages in the Outbox. Auto Replace Old Messages: If enabled, it will automatically delete the oldest message and save the new one when the Outbox or Drafts box is full. If disabled, you need to manually delete the old messages to save the new ones when the Outbox or Drafts box is full. Click Save to make your settings take effect.

-17-

4.4 Advanced M5250 3G Mobile Wi-Fi User Guide Figure 4-10 Advanced Menu There are six submenus under the Advanced tab (as shown in Figure 4-10): Dial-up, SIM Lock, Wireless, DHCP Server, System Tools and Logout . Click any of them, and you will be able to configure the corresponding functions. 4.4.1 Dial-up Figure 4-11 Dial-up Menu

-18-

M5250 3G Mobile Wi-Fi User Guide 4.4.1.1. Dial-up Dial-up Settings page allows you to do the following configurations. Profile List: A list of profile(s). Select the profile of your SIM card currently inserted in the Figure 4-12 Dial-up Settings device. Network Status: Shows whether the Internet is connected or disconnected at present. Dial-up type: The device provides two types of dial-up Auto and Manual. Please select the dial-up type as you need. Auto: The device will automatically establish connection once its started. During the process, if your Internet connection is terminated due to some exterior reasons, the device would automatically attempt connection until its successful. This option is suggested, if you have the network service paid by month. Manual: When you start the device and your computer, or when the connection is terminated during the process, you need to manually dial up for connection in here. When you select Manual as your dial-up type, you need to specify a MAX Idle Time (5 minutes by default), namely a period of inactivity, after which the device will disconnect your Internet connection, and not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. If you have the network service paid by hour, this option is suggested. Data Roamimg: It is disabled by default. If disabled, data service is not allowed when roaming. If enabled, data service is allowed when roaming, but may incur significant roaming charges. Click Save to save the above settings and have them take effect. 4.4.1.2. Profile Management

-19-

You can manage your profile on this page. M5250 3G Mobile Wi-Fi User Guide Figure 4-13 Profile Management Profile List: A list of profile(s). Select the profile of your SIM card currently inserted in the device, and then you can view the related information of it. If you find any parameters wrong, you can click Create to create a new profile with the right settings (as shown in Figure 4-14). Profile Name: Displays the name of the profile youve selected. APN Type: Displays the type of your APN, either Dynamic or Static. Dynamic means the device have dynamic APN, which needs not to be specified. Static means you specify your APN manually. APN: Displays the Access Point Name provided by your ISP. Username/Password: Displays the User Name and Password provided by your ISP. Authentication Type: Displays the specific authentication type your ISP required. None: Means no authentication is required. CHAP: Means your ISP required Challenge Handshake Authentication Protocol, which allows the device to establish authentication with the peer using three handshakes and checking the peer identity periodically. PAP: Means your ISP required Password Authentication Protocol, which allows the device to establish authentication with the peer using two handshakes. Auto: Means the device have dynamic negotiation with the dialing server and the Authentication Type needs not to be specified.

-20-

M5250 3G Mobile Wi-Fi User Guide 4.4.1.3. Network Mode Figure 4-14 New Profile Figure 4-15 Network Mode Settings Network Status: Shows whether the Internet is connected or disconnected at present. Network Mode: The device supports three modes of network connection Auto, 2G only and 3G only. You can choose the appropriate mode after disconnecting the network. If your SIM card supports GSM, please select 2G only; if your SIM card supports WCDMA, please select 3G only; if you are not very sure about it, please select Auto and then the device will detect it automatically.

-21-

Click Save to save your settings. 4.4.2 SIM Lock M5250 3G Mobile Wi-Fi User Guide Figure 4-16 SIM Lock Menu 4.4.2.1. PIN Management You can management your PIN code on this page. Figure 4-17 PIN Management SIM Card Current Status: Shows whether your PIN function is enabled or disabled. PIN Management: You can select whether to enable PIN function or not. Once the PIN function is enabled, every time you start the device with this SIM card inserted, you need to enter the PIN code; while if you go to enable the Auto-unlock PIN function, it could save you this trouble. PIN: You can set a PIN code, which requires 4-8 digits. Remaining Attempts: Shows how many attempts there are left for you to try entering the PIN code after you failed to enter the right one. You have 3 attempts at most. If you accidentally fail in three attempts, the PIN will be locked and you will be required to enter the PUK code that is written on your SIM card (as shown in Figure 4-18). If the current status of PIN is disabled, you can select Enable and set a PIN code, and then click Apply to make your settings take effect. While, if the SIM cards current status is PIN

-22-

M5250 3G Mobile Wi-Fi User Guide enabled and verified, you can select Disable and enter the current PIN code, or select Modify and enter the required parameters to set a new PIN code, and then click Apply to make your settings take effect. Figure 4-18 PIN Configuration - PUK Decode A PUK (PIN Unlocked Key), also known as Personal Unlock Code (PUC), is used in 3GPP mobile phones to reset a personal identification number (PIN) that has been lost or forgotten. The PUK is a SIM-specific code assigned by the service provider. If a user does not know his or her PUK and is prompted for it, it should be obtained from the service provider. On the page as shown in Figure 4-18, first enter the PUK code and then set a new PIN code to unlock your SIM card as well as any device with it inserted.

-23-

4.4.2.2. Auto-unlock PIN M5250 3G Mobile Wi-Fi User Guide Figure 4-19 PIN Code Auto unlock Auto-unlock PIN on Powering On: Select to enable or disable this function. PIN: If you enable the Auto-unlock PIN on Powering ON function above, please enter the appropriate PIN code of your SIM card in this field. When the PIN code is required upon device restarting, it will be validated automatically once. If validation failed, please go to PIN Management page to input another PIN code. Click Save to save your settings. 4.4.3 Wireless Figure 4-20 Wireless Menu Wireless Settings can prevent any intruders from connecting your wireless network, occupying your network resources, hacker-overhearing and hacker-attacking, and thus enhance the security of your wireless network. 4.4.3.1. Basic Settings Wireless basic settings enable you to configure your wireless parameters.

-24-

M5250 3G Mobile Wi-Fi User Guide Figure 4-21 Wireless Basic Settings Wireless Network Name (SSID): SSID is short for Service Set Identification, which is for you to distinguish the different wireless network. The default SSID of this device is TP-LINK_M5250_XXXXXX (XXXXXX stand for the last 6 characters of the MAC address of the device.) You can rename it as your preference, but the value is limited to 32 characters at most and also it is case-sensitive (For example, TEST is NOT the same as test.). Later on it will displays in the wireless network list searched by your devices. Enable SSID Broadcast: Select to enable or disable this function. When wireless clients search the local area for wireless networks to associate with, they will detect the SSID broadcast by the device. If you Enable SSID Broadcast, the Wireless device will broadcast its name (SSID) on the air; otherwise, you have to manually type in the SSID and then you can join its network. Region: Select your region from the drop-down list. This field specifies the region where the wireless function of the device can be used. It may be illegal to use the wireless function of the device in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. Channel: Select your channel from the drop-down list. If you select Auto, then the device will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. Wireless Mode: You are provided with five wireless modes here: 11b Only, 11g Only, 11n Only, 11bg Mixed and 11bgn Mixed. The default wireless mode is 11bgn Mixed. If your wireless network card didnt work well in 11bgn Mixed mode, try 11bg Mixed mode. Wireless Security: You are provided with two modes of wireless security here: Not Secured, WPA-PSK/WPA2-PSK.

-25-

M5250 3G Mobile Wi-Fi User Guide WPA-PSK/WPA2-PSK: Its the WPA/WPA2 authentication type based on pre-shared pass phrase. Its easy to set and secure to use. So its perfect for SOHO users. WPA Key: The default WPA key is the last 8 characters of IMEI. You can keep it default or enter 8~63 ASCII characters or 8~64 hexadecimal characters as your new WPA key. WiFi Auto-disable Time: If no clients connect to the devices wireless network in a period of time (15 minutes by default), the Wi-Fi will be shut down. You can press the power button to resume the Wi-Fi. Click Save to save your settings. 4.4.3.2. MAC Filter The Wireless MAC Address Filtering feature allows you to control the wireless stations accessing the device, which depends on the station's MAC addresses. MAC Address is the physical address of the wireless stations, usually in the format of XX-XX-XX-XX-XX-XX format

(X is any hexadecimal digit). Figure 4-22 Wireless MAC Filter Wireless MAC Address Filter: Select to Enable or Disable the MAC filter function of the device. The below settings will take effect only when you select Enable. MAC Address List: A List of MAC addresses will be allowed to access the device. Your MAC Address: Displays the MAC address of your client(s) currently wirelessly connected to the device. Click Save to save your settings.

-26-

M5250 3G Mobile Wi-Fi User Guide 4.4.3.3. Wireless Status The Wireless Status page displays the basic information about the Wireless client(s) that are currently connected to the device. Figure 4-23 Wireless Status ID: The index of the Wireless Client. MAC Address: The MAC address of the Wireless client. Click Refresh to update the amount of the Wireless clients and their information. 4.4.4 DHCP Server Figure 4-24 DHCP menu The Device is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the wireless clients that are connected to the device in the LAN.

-27-

4.4.4.1. Basic Settings M5250 3G Mobile Wi-Fi User Guide Figure 4-25 Basic Settings IP Address: The IP address of the device, which is used to log in its web-based management page. The default value is 192.168.0.1. Subnet Mask: An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. DHCP Server: You can select to enable or disable the DHCP server. If you disable the server, you must have another DHCP server within your network, or else you must configure the IP address of the host(s) manually. Start IP Address: This field specifies the first address in the IP address pool. 192.168.0.100 is the default start IP address. End IP Address: This field specifies the last address in the IP Address pool. 192.168.0.199 is the default end IP address. Lease Time: It is the length of time a network user will be allowed to keep connecting to the device with the current IP address (that is assigned by the DHCP server). Enter the amount of time, in minutes, that the IP address will be "leased". The time range is 1~2880 minutes. The default value is 120 minutes. Primary DNS Server: Input the DNS IP address provided by your ISP. It is optional. The default primary DNS server IP is 192.168.0.100. Secondary DNS Server: Input the IP address of another DNS server if your ISP provides two DNS servers. It is optional. The default secondary DNS server IP is 192.168.0.199. Click Save to save the changes. Note:

To use the DHCP server function of the Device, you should configure all the clients in the LAN as "Obtain an IP Address automatically" mode.

-28-

M5250 3G Mobile Wi-Fi User Guide 4.4.4.2. Client List On this page, you can view the information about the clients attached to the device. All the information is read-only. You cannot change any of the values on this page. Figure 4-26 Clients List ID: The index of the DHCP Client. Client Name: The name of the DHCP client. MAC Address: The MAC address of the DHCP client. Lease Residual Time: The rest lease time for the IP address assigned to the DHCP client. The DHCP client will automatically apply to lengthen the lease time before the dynamic IP address expires. IP Address: The IP address the device has assigned to the DHCP client. 4.4.5 System Tools Figure 4-27 System Tools menu Under System Tools menu, you can do such configurations as backing up or uploading a configuration file of the device, restoring all the settings of the device to its factory defaults, modifying the password for your login, rebooting the device, and checking some information

-29-

M5250 3G Mobile Wi-Fi User Guide about the device. As follows, we will explain them in details. 4.4.5.1. Configuration On this page, you can back up the configuration of the device to file, or upload a configuration file to the device. Figure 4-28 Configuration Management Backup Configuration to File: Click Backup to save the configuration file in your computer, for later necessary use. Its strongly recommended to back up the old configuration file before firmware upgrade or new configuration file upload, in case that during those process it might get the original configuration lost. Upload Configuration File: Click Browse to locate the config.bin file or directly enter its location file, and then click Upload to upload the configuration file. 4.4.5.2. Restore Factory You can restore the device to its factory default settings, when necessary.

-30-

M5250 3G Mobile Wi-Fi User Guide Figure 4-29 Restore to factory defaults Restore to Factory Defaults: Click Restore to reset all configuration settings to their default values. All of the settings you have saved will be lost when the default settings are restored. You can restore the following factory default values:

The default login Password: admin The default IP Address: 192.168.0.1 The default Subnet Mask: 255.255.255.0 The default SSID: TP-LINK_M5250_XXXXXX (XXXXXX is the last 6 characters of the devices MAC address). Please refer to the label on the rear cover of the device for the default SSID. The default Wireless Password: Please refer to the label on the rear cover of the device for the default wireless password. 4.4.5.3. Modify Password It is strongly recommended that you change the factory default login password of the device.

-31-

M5250 3G Mobile Wi-Fi User Guide Old Username / Password: The old Username/ password that is used to log in of the Figure 4-30 Modify Login Password device. New Username / Password: The new Username/ password you want to set for the login of the device. Confirm New Password: Enter the new password again for confirmation. Click Save when you finish the setting. Click Clear to clear all the values you have already set, and then you can reset it. Note:

The Username / password must not exceed 15 characters in length and not include any spaces.

-32-

4.4.5.4. Reboot M5250 3G Mobile Wi-Fi User Guide Reboot the Device: Click Reboot to get the device rebooted and the saved settings to take effect. Figure 4-31 Reboot the Device 4.4.5.5. About Device This page displays the related information about this device, including Model, Firmware Version, Hardware Version, MAC Address, and IMEI. Figure 4-32 Device Information Model: The Model of the device. Firmware Version: The current firmware version Hardware Version: The current hardware version.

-33-

M5250 3G Mobile Wi-Fi User Guide MAC Address: The physical address of the device. The value is read-only thus could not be changed. IMEI: International Mobile Equipment Identity. Composed of 15 digits, it is unique and thus used to identify individual mobile equipment. 4.4.6 Logout Figure 4-33 Logout Click this button to logout the web-based management page.

-34-

M5250 3G Mobile Wi-Fi User Guide Appendix A: FAQ T1. What should I do if I cannot log in the web-based management page of M5250 after I have successfully connected to M5250?

1) Please verify your PCs IP address is on the same network segment with M5250. If not, please go to the next step. 2) Manually set an IP address for your PC, or configure your PC to Obtain an IP address automatically and Obtain DNS server address automatically. Thus to make sure your PCs IP address on the same network segment with M5250. If the above two steps failed, please feel free to contact our technical support. 3) T2. What should I do if I cannot access the Internet?

1) Please verify the card you inserted into M5250 is a valid WCDMA/GSM SIM card. 2) Please check if the PIN function is enabled. If enabled, please go to Advanced -> SIM Lock -> PIN Management and enter the correct PIN code. 3) Please verify the current ISP parameters are correct. Otherwise, please go to Advanced ->

Dial-up -> Profile Management and configure the correct parameters. 4) Please check if the dial-up type is auto or manual. If it is manual dial-up, please go to Advanced -> Dial-up -> Dial-up, and click Connect to manually get connected to the Internet. If the above steps failed, please feel free to contact our technical support. 5) T3. What if I forget my login password?

1) Restore M5250 to its factory defaults;

2) Log into M5250 with the default password: admin. And then reconfigure M5250 following the QIG. T4. How could I restore M5250 to its factory defaults?

Method 1:

With M5250 powered on, use a pin to press and hold the RESET button in the interior panel until all of the LED light on. Method 2:

Get logged in to the web-based management page of M5250, and then go to Advanced ->

System Tools -> Restore Factory, and click Restore. Note:

Once M5250 is reset, all the current configurations will be lost and you need to reconfigure it. T5. How to access the micro SD memory card of M5250?

1) Connect one end of the USB cable to the micro USB port of M5250 and the other end to the USB port of your PC. If there appears the Found New Hardware Wizard window, please click Cancel to ignore it. 2)

-35-

M5250 3G Mobile Wi-Fi User Guide Figure-A-0-1 3) Double click Computer icon on your desktop. The inserted micro SD card is displayed as removable disk in file explorer (Here we take Removable Disk (F:) for example). Double click to access the micro SD card just as access a hard disk. Figure-A-0-2

-36-

M5250 3G Mobile Wi-Fi User Guide Appendix B: Configuring the PC In this section, well introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapters manual if needed. 1. 1) On the Windows taskbar, click the Start button, point to Settings, and then click Control Install TCP/IP component Panel. 2) Click the Network and Internet Connections icon, and then click on the Network Connections tab in the appearing window. 3) Right click the icon that showed below, select Properties on the prompt page. 4) In the prompt page that showed below, double click on the Internet Protocol (TCP/IP). Figure B-0-1 Figure B-0-2

-37-

M5250 3G Mobile Wi-Fi User Guide 5) The following Internet Protocol (TCP/IP) Properties window will display and the IP Address tab is open on this window by default. You have two ways to configure the TCP/IP protocol below:

Setting IP address automatically Select Obtain an IP address automatically, Choose Obtain DNS server address automatically, as shown in the Figure below:

Figure B-0-3 Setting IP address manually a. Select Use the following IP address radio button. And the following items available b. If the Device's LAN IP address is 192.168.0.1, type IP address is 192.168.0.x (x is from 2 to 254), and Subnet mask is 255.255.255.0. c. Type the Devices LAN IP address (the default IP is 192.168.0.1) into the Default gateway field. d. Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can type the DNS server IP address, which has been provided by your ISP.

-38-

M5250 3G Mobile Wi-Fi User Guide 6) Now click OK to keep your settings. Figure B-0-4

-39-

Appendix C: Specifications M5250 3G Mobile Wi-Fi User Guide General Standards Network Type Certification Dimension Interface LED Display IEEE 802.11n, IEEE 802.11b, IEEE 802.11g 3G: HSPA+ / HSUPA / HSDPA / UMTS 2G: GSM/GPRS/EDGE CE, FCC, RoHS 94mm x 56.7mm x 19.8mm (W x D x H) One Micro USB port One SIM card slot One Micro SD Memory card slot Power button RESET button Network status Wi-Fi status Battery status Power Supply 2000m Internal Rechargeable Battery 5VDC/1.0A External Power Adapter Wireless Band Data Rate Frequency EIRP Security Antenna Environment Temperature Humidity WCDMA: 2100/900Mhz GSM: 850/900/1800/1900Mhz Download: 21.6Mbps Upload: 5.76Mbps 2.4-2.4835GHz

<20dBm WPA-PSK/WPA2-PSK Internal Antenna Operating : 0~35 Storage: -20~60 Operating: 0% ~ 75% RH, Non-condensing Storage: 0% ~ 75% RH, Non-condensing

-40-

M5250 3G Mobile Wi-Fi User Guide Appendix D: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding. The Enhanced Wireless Consortium

(EWC) [3] was formed to help accelerate the IEEE 802.11n development process and promote a technology specification for interoperability of next-generation wireless local area networking (WLAN) products. 802.11b - The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. 802.11g - specification for wireless networking at 54 Mbps using direct-sequence spread-spectrum (DSSS) technology, using OFDM modulation and operating in the unlicensed radio spectrum at 2.4GHz, and backward compatibility with IEEE 802.11b devices, and WEP encryption for security. DHCP (Dynamic Host Configuration Protocol) - A protocol that automatically configure the TCP/IP parameters for the all the PC(s) that are connected to a DHCP server. ISP (Internet Service Provider) - A company that provides access to the Internet. SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name. WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit or 128-bit shared key algorithm, as described in the IEEE 802.11 standard. Wi-Fi - A trade name for the 802.11b wireless networking standard, given by the Wireless Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standards group promoting interoperability among 802.11b devices. WLAN (Wireless Local Area Network) - A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area.

-41-

exhibit
download
text

1 2

Internal Photos

Internal Photos

pdf

227.43 KiB

exhibit
download
text

1 2

External Photos

External Photos

pdf

154.08 KiB

exhibit
download
text

1 2

Label Location

ID Label/Location Info

pdf

37.07 KiB

exhibit
download
text

1 2

Agent Authorization

Cover Letter(s)

pdf

91.49 KiB

exhibit
download
text

1 2

Request for Confidentiality

Cover Letter(s)

pdf

154.01 KiB

		frequency	equipment class	purpose
1	2013-12-26	1850.2 ~ 1909.8	PCT - PCS Licensed Transmitter worn on body	Original Equipment
2		2412 ~ 2462	DTS - Digital Transmission System

Application Forms

app s	Applicant Information
1 2	Effective	2013-12-26
1 2	Applicant's complete, legal business name	TP-Link Technologies Co., Ltd.
1 2	FCC Registration Number (FRN)	0013661145
1 2	Physical Address	Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan
1 2		Building 24 (floors 1,3,4,5) and 28 (floors1-4)
1 2		Shenzhen, N/A
1 2		China

app s	TCB Information
1 2	TCB Application Email Address	h******@acbcert.com
1 2	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	TE7
1 2	Equipment Product Code	M5250

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	J****** H**
1 2	Title	Regulatory Compliance Manager
1 2	Telephone Number	75521********
1 2	Fax Number	75526********
1 2	E-mail	c******@tp-link.com

app s	Technical Contact
1 2	Firm Name	AUDIX Technology Corporation
1 2	Name	B**** C****
1 2	Physical Address	No. 53-11, Dingfu, Linkou Dist.
1 2		New Taipei City, 24443
1 2		Taiwan
1 2	Telephone Number	886 2******** Extension:
1 2	Fax Number	886 2********
1 2	E-mail	b******@audixtech.com

app s	Non Technical Contact
1 2	Firm Name	AUDIX Technology Corporation
1 2	Name	J****** W******
1 2	Physical Address	No. 53-11, Dingfu, Linkou Dist.
1 2		New Taipei City, 24443
1 2		Taiwan
1 2	Telephone Number	886 2******** Extension:
1 2	Fax Number	886 2********
1 2	E-mail	J******@audixtech.com

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	PCT - PCS Licensed Transmitter worn on body
1 2	Equipment Class	DTS - Digital Transmission System
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	3G Mobile Wi-Fi
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Does not apply
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Power output is ERP for Part 22 and EIRP for Part 24. The SAR data in this filing is applicable to demonstrate compliance for the personal wireless router only as shown in this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.68 W/kg; Simultaneous Transmission SAR: 0.78 W/kg. This device contains GSM/WCDMA functions that are not operational in U.S. Territories. This filing is only applicable for 850 MHz Cell and 1900 MHz PCS operations.
1 2	Grant Comments	Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for the personal wireless router only as shown in this filing. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Body-worn 0.16 W/kg; Simultaneous Transmission SAR: 0.78 W/kg.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	Audix Technology Corporation
1 2	Name	L****** L**
1 2	Telephone Number	886-2******** Extension:
1 2	Fax Number	886-2********
1 2	E-mail	l******@audixtech.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	22H	BC	824.2	848.8	1.31826	0.1 ppm	300KGXW
1	2	22H	BC	824.2	848.8	0.63533	0.1 ppm	300KG7W
1	3	24E	BC	1850.2	1909.8	1.8578	0.1 ppm	300KGXW
1	4	24E	BC	1850.2	1909.8	1.68267	0.1 ppm	300KG7W
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C		2412.00000000	2462.00000000	0.1309200

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BE3U-X1 CND Electronic Technology (shenzhen) Co.,Ltd 2ADYY-T1001W TECNO MOBILE LIMITED 2AS9406 SG Wireless Limited 2AC8UA2427 Anhui Huami Information Technology Co.,Ltd. A3LBE201D Samsung Electronics Co Ltd