User Guide AC1200 Wireless Dual Band PCI Express Adapter Archer T4E REV1.0.0 1910012458 Contents About This Guide 1 Chapter 1 Get to Know About Your Adapter 2 Product Overview . 3 1. 1. 1. 2. LED Status . 3 Chapter 2 Connect to a Computer 4 Chapter 3 Use Your Adapter 7 Install Driver . 8 3. 1. 3. 2. Join a Wireless Network. 9 3. 3. Uninstall Driver. 9 Appendix: Troubleshooting 10 About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and detailed instructions for each steps. When using this guide, please notice that features of the adapter may vary slightly depending on the model and software version you have. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide, the following conventions are used:
Convention Description Teal Italic Hyperlinks are in teal italic. You can click to redirect to a website or a specific section. Teal Note:
Tips:
Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device.
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition. More Info The latest driver can be found at Download Center at http://www.tp-link.com/support. The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the product. Specifications can be found on the product page at http://www.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at http://www.tp-link.com/support. 1 Chapter 1 Get to Know About Your Adapter This chapter introduces what the adapter can do and shows its appearance. This chapter contains the following sections:
Product Overview LED Status Chapter 1 Get to Know about Your Adapter Product Overview 1. 1. The TP-Link Wireless PCI Express Adapter connects your desktop computer to a Wi-Fi network for lag-free video streaming, online gaming, secure internet surng and internet calls. Compatible with 802.11a/b/g/n products Maximum speed of up to 867Mbps on 5GHz network and 300Mbps on 2.4GHz network Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK 1. 2. LED Status You can check the adapters working status by following the LED Explanation table. Status On The adapter has been installed. Indication Flashing The adapter is transmitting or receiving data. Tips:
If the LED is o, try these troubleshooting tips:
1. Remove and reinstall the adapter. 2. Refer to Troubleshooting-T2 to check if the adapter is recognized and enabled. Reinstall the adapter software, if necessary. 3 Connect to a Computer This chapter introduces how to install the adapter into your computer. Chapter 2 Follow the steps below to insert the adapter into your computer:
1. Turn off the computer, unplug the power cable and remove the case panel. Connect to a Computer 2. Locate an available PCI-E slot and carefully insert the adapter. 5 Chapter 2 3. Connect the antennas to the adapter. Connect to a Computer 4. Replace the case panel, plug in the power cable and turn on your computer. Note:
If the bracket is not suitable for your computer, detach it from the adapters board and replace it with the low-profile bracket provided. 6 Chapter 2 Use Your Adapter This chapter introduces how to install your adapters driver, use your adapter to join a wireless network, and uninstall the driver in a Windows system. The adapter is equipped with a setup wizard, which can guide you through the installation process. This chapter includes the following sections:
Install Driver Join a Wireless Network Uninstall Driver Chapter 3 Install Driver 3 1 Follow the steps below to set up your adapter:
1 Insert the resource CD into your CD drive and run the Autorun.exe. Note:
You can also download the driver from the products Support page at www tp-link com. 2 Select Archer T4E and follow the instructions to continue the installation. Note:
If you cant install the driver successfully, disable the antivirus software and firewall, then try again. 3 When the following screen appears, the driver has been installed successfully. 8 Chapter 3 Use Your Adapter Join a Wireless Network 3 2 You can join a wireless network via Windows Wireless Utility. Follow the instructions below to use your computer systems built-in wireless utility:
1. Click
(Network icon) on the taskbar. Select the Wi-Fi network you want or
, to join, and click Connect. Enter the network password when prompted. 2. When the network icon changes to or
, it indicates a successful network connection. 3 3 Uninstall Driver The software uninstallation steps vary a bit in different systems, please follow the appropriate instructions for your Windows operating system: Windows 8/8.1/10, Windows XP/7. Windows 8/8 1/10 Go to Start > Apps, find the TP-Link application. Click Uninstall TP-Link Archer T4E, then follow the on-screen instructions to complete the uninstallation. Windows XP/7 Go to Start > All Programs > TP-Link > Uninstall TP-Link Archer T4E. Follow the on-screen instructions to complete the uninstallation. 9 Chapter 3 Use Your Adapter Appendix: Troubleshooting T1. What should I do if the adapter is not detected?
Make sure the adapter is securely located in the appropriate PCI-E slot. Make sure you meet the minimum system requirements for the adapter and that the latest Windows and system updates are installed on your computer. Make sure you use the latest driver for your specific adapter. The latest drivers can be found at the products Support page at http://www.tp-link.com. Try a different PCI-E slot on the computer. Try restarting the computer or try the adapter on a different computer. T2. How to check if I have installed the driver for my adapter successfully or not?
1. On your computer, please right click Computer icon and go to Manage;
2. Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right click it and then go to Properties;
10 3. If you can see This device is working properly. in the red box, you have already installed the driver successfully. T3. What should I do if cant connect to the Wi-Fi after installing the driver?
Refer to T2 to check if you have installed the driver for your adapter successfully . Disable the antivirus software and firewall, then try again. Make sure the adapter is securely located in the appropriate PCI-E slot. Restart your computer and try again. Re-install the driver and try again. Try a different PCI-E slot on the computer. 11 T4. How to find the hardware version of the adapter?
The hardware version printed on the product label on the package or the adapter. There is a character string Ver:X.Y (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter. 12 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-Link Technologies Co., Ltd. All rights reserved. 13 FCC STATEMENT Product Name: Archer T4E Model Number: AC1200 Wireless Dual Band PCI Express Adapter Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 ) This device may not cause harmful interference. 2 ) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 14 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2018.12.7 15 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400MHz2483.5MHz(20dBm) 5150MHz5250MHz(23dBm) 5250MHz5350MHz(20dBm) 5470MHz5725MHz(27dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. Korea Warning Statements
. NCC Notice 4.7.9.1 4.7.9.2 16 BSMI Notice PCB Pb CrVI Hg Cd PBB PBDE 1. 0.1 wt % 0.01 wt %
2.
,
. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device Do not use damaged charger or USB cable to charge the device. Do not use the device where wireless devices are not allowed. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. For EU/EFTA, this product can be used in the following countries:
AT EE IS NO DE HU MT SK CH FI LT RO DK IE NL UK CZ HR LV SI BG ES LI PT CY FR LU SE BE EL IT PL 17 Explanation of the symbols on the product label Symbol Explanation RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 18 ISED CAN ICES-3 (B)/NMB-3(B) Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1. lappareil ne doit pas produire de brouillage;
2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. This radio transmitter (IC: 8853A-T4E / Model name: Archer T4E) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 8853A-T4E / Model name: Archer T4E) a t approuv par Industrie Canada pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal. Les types dantenne non inclus dans cette liste ci-dessous et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. Antenna Type Dipole Antenna Frequency Band (MHz) 2400 ~ 2500 5150 ~ 5850 TX Paths Max Antenna Gain (dBi) CDD Directional Gain (dBi) For Power For PSD 2 2 2.0 2.0 2.0 2.0 5.01 5.01 Caution:
1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate. 4. The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. 5. DFS (Dynamic Frequency Selection) products that operate in the bands 5250-
5350 MHz, 5470-5600MHz, and 5650-5725MHz. Mise en garde:
1. Le dispositif destin tre utilis dans la bande de frquences 51505250 MHz est destin uniquement une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable caus par les systmes mobiles satellites dans le mme canal;
2. Pour les dispositifs avec une ou plusieurs antennes dtachables, le gain d'antenne maximal autoris pour les dispositifs des bandes 5250-5350 MHz et 5470-5725 MHz doit tre tel que l'quipement respecte encore les normes e.i.r.p. limite;
3. Pour les dispositifs avec une ou plusieurs antennes dtachables, le gain d'antenne maximal autoris pour les dispositifs de la bande 5725-5850 MHz doit tre tel que l'quipement soit toujours conforme la norme e.i.r.p. limites, le cas chant. 4. Les radars haute puissance sont attribus en tant qu'utilisateurs principaux
(utilisateurs prioritaires) des bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer des interfrences et / ou des dommages aux dispositifs LE-LAN. 5. Produits DFS (Dynamic Frequency Selection) fonctionnant dans les bandes de frquences 5250-533 MHz, 5470-5600 MHz et 5650-5725 MHz. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Dclarationd'exposition aux radiations:
Cetquipementestconforme aux limitesd'exposition aux rayonnements IC tablies pour un environnement non contrl. Cetquipementdoittreinstall et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.